Jeans Button Common Problem

  Jeans Button Cowboy buckle by the above buttons (A) and the following nails (B pieces) composed of two, by knocking the way the two parts together. Due to the combination of the shape slightly like the Chinese "workers" word, so named "Gongzi deduction", also known as "cowboy deduction."

   1, hit the jeans, with a little force can be opened, nails and buttons are not tight

If it is Jiaxian Gongzi deduction, which is associated with the work of the plastic heart of the relationship, if the use of almost plastic plastic heart, will not be able to withstand the nail hit the pressure, it will squeeze open. So we will pull out a hard pull. And with good plastic - new material to do, it will not happen this situation. But also with the shape of the nail has a relationship, there are spikes, but also screw nails, the general situation of the use of screw nails.

2, nails marked on the buttons, the word buckle the surface directly through the wear

Can be a simple analysis can be out, is the word buckle the panel is too thin. Simply can not withstand the nail hit the momentum, all of a sudden you can put the button to wear off. This kind of situation is relatively small, like alloy, copper, iron word deduction, do ordinary is also very rare, unless deliberately hard to play, will face to wear off.

3, the word deduction on the pair of jeans, the surface out of color

In fact, this problem is relatively simple, the word buckle the surface fade, which is generally associated with electroplating and painting, plating is not good, no oil seal products, the color is generally not long, in the air after oxidation, the color will fade, Also in the process of friction will fall. And paint the case, the paint out, which is the composition of the paint with paint products, good paint will not fall out, unless it is the kind of poor paint.

4, the word buckle rough

Jeans Button Button this problem, which is related to the surface treatment process of the factory, polishing is not in place, the product mold is not good. These points to do a good job, can be avoided.

Jeans Button There are odds deduction according to different customer requirements, like Dijiao, painting, hanging plating, etc., the problems are also based on specific circumstances.